Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red 250ml

Name: Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red 250ml
SKU: ASAPRD250
Availability: InStock

Product Code: ASAPRD250

Ask a question
about this product

£6.14 inc. VAT

£5.12 ex. VAT

RRP ~~£7.09~~ | SAVE £0.95RRP ~~£5.91~~ | SAVE £0.79

Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red is a water-based paint that dries to a satin finish. It resists flaking or peeling.

Product Features
- Quick drying and easy to apply
- Indoor and Outdoor use
- For use on UPVC, Most Plastics, Timber, Metal, Tiles, Stone and Brick
- No need to use a primer
- Resists flaking or peeling because of its flexible capabilities
- 250ml
Description
Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red 250ml
Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red is a water-based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. Suitable for use indoors and outdoors on various surfaces. Rustins Quick Dry All Surface All Purpose Paint is touch dry in 30 minutes, and recoating time is approximately 2-3 hours.
- Type: A high-performance acrylic satin paint.
- Intended Use: For use on a wide range of surfaces such as UPVC, most plastics, timber, metal, tiles, stone and bricks without the need of a primer.
- Special Features: Quick-drying and easy to apply to a wide range of surfaces, both indoors and outdoors.
- Coverage 12-14m² per Litre 1 coat.
- Colour: Red
- Finish: Satin
- Size: 250ml
How to use
Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red Usage Instructions
Preparation: The surface must be clean and free from dust and any loose paint, wax, grease, dirt, fungal growth or solid matter likely to interfere with the adhesion of the paint. Do not apply to damp areas. Sources of damp should be eliminated before applying the paint. The product can be applied to surfaces without the need of a primer. However on metal improved protection will be achieved if an anti-corrosive metal primer such as Rustins Quick Dry Red Oxide Primer or Rustins Galvanised Primer is first applied. The product can also be applied directly to timber but a suitable primer such as Rustins Quick Dry Primer and Undercoat will help to reduce the appearance of the grain of the timber if this is important.
Application: STIR WELL BEFORE USE. Do not thin the product. Apply evenly by brush. One or two coats should be applied allowing 3-4 hours between coats in warm dry conditions. Cold damp conditions will significantly extend the drying times. Do not apply outdoors when foggy or likely to rain before the paint has dried.
- Coats: 1 coat is usually sufficient. A second coat may be applied for improved durability.
- Drying Time: Approximately 30 minutes, depending on temperature and humidity.
- Re-coating Time: Approximately 3-4 hours
- Application Temp. Ideally 15-25°C. Do not apply if rain imminent.
- Maintenance: The surface may be washed with a mild detergent solution and a scrubbing brush and recoated if necessary.
- Compatibility: May be applied to a wide range of surfaces and paints but test for compatibility and adhesion if in doubt.
- Settlement: STIR WELL BEFORE AND DURING USE.
- Clean-Up: Remove excess product from brushes before cleaning. Clean brushes whilst wet with water. Hard brushes can be cleaned with Rustin’s Brush Restorer.
Technical Information
Rustins Quick Dry All Surface All Purpose Paint (ASAP) Red Technical Information
Barcode: 5015332001712
Weight: 0.27kg
Shelf-life/Storage: Many years if stored in original tightly closed container in a cool dry place.
Hazards: Keep out of reach of children. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser.
Product Reviews