Rustins Quick Dry Chalky Paint Blenheim Blue Usage Instructions

Preparation: Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When used to prime bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming.
Compatibility: Compatible with many paint products, May be tinted with water-borne tinting bases, but must be tested for compatibility first. Not for use as a metal primer. Metals must be primed using Rustin’s Red Oxide Metal Primer. Not a stain-blocking product. If unsure, test on a small inconspicuous area before proceeding.
Application: Apply liberally and evenly with a synthetic short fibre brush or roller. For brush application, the primer coat may be thinned by mixing 5 parts with 1 part water if necessary.
Settlement: Stir well before use and ensure any sediment is thoroughly mixed in.
Coats: One coat over primed surfaces. A minimum of 2 coats are required on bare substrates.
Drying Time: Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time: 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Settlement: STIR WELL BEFORE USE. Ensure any sediment is thoroughly mixed in.

Rustins Quick Dry Chalky Paint Blenheim Blue Technical Information

Barcode: 5015332001217
Weight: 0.5kg

Shelf-life/Storage: Many years in a cool, dry place if stored in original, tightly closed container. Do not store below 5°C. Protect from frost and extremes of temperature.
Hazards: Non-flammable. Avoid contact with eyes and skin. Eyes and skin should be rinsed immediately if contact occurs with plenty of water. Seek medical attention. Keep container tightly closed and out of reach of children. A full Health and Safety Data Sheet is Available on request.