Rustins Quick Dry Door Oil Usage Instructions

Preparation: The wood must be bare, or sanded clean of any previous coatings. The wood must also be smooth, dry and free from wax, dust and surface contaminants. Remove any waxes present with Rustins Surface Cleaner and a scouring pad. Wipe off residues with clean rags. Oily timbers such as Teak or Iroko must be wiped over with white spirit to remove surface oils which may inhibit drying and penetration of Rustins Quick Dry Door Oil. Minor damage/splits may be repaired/filled with Rustins Wood Filler.
Application: Using a brush or roller, apply evenly in the direction of grain. Rustins Wood Dye may be used under or in Rustins Door Oil if desired. Test before proceeding if other brands of wood colourant are to be used. Coats: Apply a minimum of 2 coats initially. Drying Time: Touch dry in approximately 30 minutes, depending on temperature and humidity. Re-coating Time: minimum of 2 hours, depending on temperature and humidity.
Application Temp: Ideally 15-25°C. Do not apply below 5°C.
Maintenance: The door should be cleaned with a well-wrung cloth or mop, using a mild detergent solution. Dirt and scratches may be removed by rubbing with a plastic scouring pad. If the surface has become dull or worn, it may be refinished after cleaning.
Settlement: Stir well before use. 
Clean-Up: Clean brushes with water if still wet. Hard brushes may be cleaned with Rustins Brush Restorer. 

Rustins Door Oil Technical Information

Barcode: 5015332004263
Weight: 0.79kg

Product Safety

Warning

• Causes serious eye irritation.
• Causes skin irritation.

Shelf-life/Storage: Many years in original sealed packaging if stored in cool, dry conditions.
Hazards: Causes skin irritation. Causes serious eye irritation. Wear protective clothing/gloves and face/eye protection.