Free Advice<br> & Expertise

Free Advice
& Expertise

Award-winning<br> Reputation

Award-winning
Reputation

Wide Range<br> of Products

Wide Range
of Products

Nationwide<br> UK Shipping

Nationwide
UK Shipping

Secure Online<br> Payments

Secure Online
Payments

30-day Returns<br> & Exchanges

30-day Returns
& Exchanges

Free Advice<br> & Expertise

Free Advice
& Expertise

Award-winning<br> Reputation

Award-winning
Reputation

Wide Range<br> of Products

Wide Range
of Products

Nationwide<br> UK Shipping

Nationwide
UK Shipping

Secure Online<br> Payments

Secure Online
Payments

30-day Returns<br> & Exchanges

30-day Returns
& Exchanges

Home Shop Wood & Furniture Care Wood Finishing Wood Varnish Finishes Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre
Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre
Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre - Image 2
Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre - Image 3
Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre - Image 4
Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre - Image 5

Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre

Product Code: EAVS1000

Ask a question
about this product

£17.29 inc. VAT

£14.41 ex. VAT

RRP £20.84 | SAVE £3.55RRP £17.37 | SAVE £2.96

Rustins Outdoor Clear Varnish Satin is a quick-drying, durable, clear coating which gives a long lasting protection to all external wood and is touch dry in 30 minutes.

  • Product Features
    • Water based and quick drying
    • Enhances the beauty of wood
    • Longer lasting wood protection
    • Gives UV protection
    • Made in the UK
  • Description

    Rustins Quick Dry Outdoor Clear Varnish Satin 1 Litre

    Rustins Quick Dry Outdoor Clear Varnish Satin is a quick-drying, durable, clear coating which gives a long lasting protection to all external wood and is touch dry in 30 minutes, re-coatable in 4 hours. 

    Intended Use: Exterior joinery both hard and softwood, doors, windows, garden furniture, conservatories. May also be used as a sealer for concrete.

    Type: Clear water-based acrylic varnish. Gives long lasting protection to all external wood, allowing the natural grain to show through.
    Special Features: Low odour, non-yellowing, resists cracking, peeling, blistering. The varnish has very little effect on the colour of the timber that it is applied to.

    Coverage: 12-15m² per litre, 1 coat, depending on absorbency of surface.

    Finish: Satin – Also available in Matt and Gloss Finish

    Size: 1 Litre 
    Also available: Rustins Quick Dry Outdoor Clear Varnish Satin 250ml, Rustins Quick Dry Outdoor Clear Varnish Satin 500ml 

    and Rustins Quick Dry Outdoor Clear Varnish Satin 2.5 Litre

    To Download the Product Information Sheet (PDF) Click HERE

  • How to use

    Rustins Quick Dry Outdoor Clear Varnish Satin Usage Instructions

    Preparation: Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound. Fill large cracks, open joints and damaged areas with a high quality flexible filler. Wash oily woods, knots or resinous areas with white spirit. Remove mould, lichens, algae and moss with brush, scraper & domestic bleach, then rinse thoroughly and allow to dry. Rustins Wood Dye may be applied to bare wood prior to varnishing.
    Application: Using a synthetic brush, apply liberally with a full brush finishing with the grain. The first coat may be diluted with water on hot days (up to 15%). Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.
    Coats: Apply 3 coats and lightly sand after 1st coat if there is raising of the grain..
    Drying Time: Touch dry 30 minutes. (On hot days may be touch dry within 10 minutes).
    Re-coating Time: 4 hours minimum, depending on temperature & humidity.
    Application Temp: Ideally 15-25°C. Do not apply below 10°C, or in high humidity or if rain expected.

    Maintenance: Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.
    Compatibility: May be applied over old existing coating if these are in good condition and rubbed down to provide a key. Coatings not in good condition should be removed with Rustins Strypit Paint and Varnish Stripper. If applying over wood preservatives test on a small area to ensure the varnish dries and adheres well.
    Settlement: STIR WELL BEFORE USE. May dry glossy if not adequately stirred.
    Clean-Up: With water whilst still wet. If dried-on, clean equipment & brushes with Rustins Brush Restorer.
  • Technical Information

    Rustins Quick Dry Outdoor Clear Varnish Satin Technical Information

    Barcode: 5015332711031
    Weight: 1.2kg

    Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. PROTECT FROM FROST.
    Hazards: Non-flammable. avoid contact with eyes, skin and clothes. 

    To Download the Safety Data Sheet (PDF) for Rustins Quick Dry Outdoor Clear Varnish Satin Click HERE

  • Product Reviews

You may also like…

Share this Product

Close

Close

Ask a question about this product

Please submit your question and member of our team will look into your query and reply to you. You will receive an email notification when we have provided an answer.

    Need help? We're only a call away
    Close

    Get in touch with our team

    Our knowledgeable team at Homecare Essentials are here to help with expert advice and assistance. Please call ur team or use the form below to send us a message.

    01733 241960
    Mon to Fri: 9.00 am - 5.00 pm