Rustins Quick Dry Outdoor Wood Stain Medium Oak 500ml

Name: Rustins Quick Dry Outdoor Wood Stain Medium Oak 500ml
SKU: ESMO500
Availability: InStock

Product Code: ESMO500

Ask a question
about this product

£8.69 inc. VAT

£7.24 ex. VAT

RRP ~~£9.82~~ | SAVE £1.13RRP ~~£8.18~~ | SAVE £0.94

Rustins Exterior Wood Stain Medium Oak is quick drying, very durable. Gives long lasting protection to all external wood.

Product Features
- Water based and quick drying
- Stains and finishes in one
- Gives UV protection
- Satin finish
- Allows the natural grain to show through
Description
Rustins Exterior Wood Stain Medium Oak is quick drying, very durable and available in gloss and satin. Gives long lasting protection to all external wood, and is touch dry in 30 minutes, re-coatable in 4 hours.
Intended Use: Exterior joinery both hard & softwood, doors, windows, garden furniture, conservatories. May also be used as a sealer for concrete
Type: Coloured water-based acrylic varnish. Gives long lasting protection to all external wood, allowing the natural grain to show through.
Special Features: Low odour, resists cracking, peeling, blistering.
Coverage: 12-15m² per Litre per coat, depending on absorbency of surface.

Colour: Medium Oak – Also available in Dark Oak, Ebony, Light Oak, Mahogany, Teak and Walnut
Click HERE to see full Range
Finish: Satin
Size: 500ml
Also available in 250ml, 1 Litre and 2.5 Litre Sizes
How to use
Preparation Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound. Fill large cracks, open joints and damaged areas with a high quality flexible filler. Wash oily woods, knots or resinous areas with white spirit. Remove mould, lichens, algae & moss with brush, scraper & domestic bleach, then rinse thoroughly and allow to dry. Rustins Wood Dye may be applied to bare wood prior to varnishing.

Application Using a synthetic brush, apply liberally with a full brush finishing with the grain. The first coat may be diluted with water on hot days (up to 15%). Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.

Coats Apply 3 coats and lightly sand after 1st coat if there is raising of the grain..

Drying Time Touch dry 30 minutes. (On hot days may be touch dry within 10 minutes).

Re-coating Time 4 hours minimum, depending on temperature & humidity.

Application Temp. Ideally 15-25°C. Do not apply below 10°C, or in high humidity or if rain expected.

Maintenance Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.

Compatibility May be applied over old existing coating if these are in good condition and rubbed down to provide a key. Coatings not in good condition should be removed with Rustins Strypit Paint and Varnish Stripper. If applying over wood preservatives test on a small area to ensure the varnish dries and adheres well.

Settlement STIR WELL BEFORE USE. May dry glossy if not adequately stirred.

Clean-Up With water whilst still wet. If dried-on, clean equipment & brushes with Rustins Brush Restorer
Technical Information
Barcode: 5015332732029
Weight: 0.55kg
Shelf-life/Storage Many years if stored in original, tightly closed container in normal conditions. PROTECT FROM FROST.
Product Reviews

https://www.youtube.com/watch?v=rkNsT4NHIvo?si=Rk-jBY54E-5wuX_G