Rustins Quick Dry Satin Paint White 500ml

Name: Rustins Quick Dry Satin Paint White 500ml
SKU: WHISW500
Availability: InStock

Product Code: WHISW500

Ask a question
about this product

£9.79 inc. VAT

£8.16 ex. VAT

RRP ~~£10.42~~ | SAVE £0.63RRP ~~£8.68~~ | SAVE £0.52

Rustins Quick Dry Satin Paint White is a water based hard-wearing satin finish white paint that can be used for interior and exterior. It is also suitable for use on wood and metal.

Product Features
- Water based and quick drying
- For interior and exterior use
- Low odour
- Does not yellow
- Heat resistant
Description
Rustins Quick Dry Satin Paint White 500ml
Rustins Quick Dry Satin Paint White is a water based hard-wearing satin finish white paint that can be used for interior and exterior. As this is a low VOC paint, it is touch dry in approximately 30 minutes and can be re-coated, if required, after 2 hours. It is also suitable for use on wood and metal.
Coverage: Approximately 13m² per litre per 1 coat, depending on the absorbency of the surface.

To Download the Product Information Sheet Click HERE
Finish: Satin
Size: 500ml
Also Available: Rustins Quick Dry Satin Paint White 250ml and Rustins Quick Dry Satin Paint White 1 Litre
How to use
Rustins Quick Dry Satin Paint White Usage Instructions
Preparation: Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. If already painted, remove flaking paint by scraping or with Rustin’s Strypit Paint and Varnish Stripper. If applying to metal, remove any rust with a scraper or with Rustin’s Rust Remover and apply one coat of Rustin’s Red Oxide Metal Primer. If applying to bare wood apply, a coat of Rustin’s Quick Dry Primer and Undercoat.
Application: Stir well before use. Apply liberally and evenly with a synthetic fibre brush. A short haired varnish roller cab be used but it is best applied by brush.
Coats: 3 coats are recommended and 2 coats on previously painted surfaces.
Drying Time: Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time: Re-coating Time 2 hours minimum, depending on temperature and humidity.
Application Temp: Ideally 15-25° C. Do not use below 10°C or in conditions of high humidity.
Coverage: Approximately 13 sq.m per litre per 1 coat, depending on the absorbency of the surface.
Maintenance: Keep surface clean with mild detergent and warm water, Reapply when necessary.
Compatibility: All types of paint may be applied over this product, such as Rustin’s White Gloss Paint and Rustin’s Quick-Drying Radiator Enamel. Not for use as a metal primer. Metals must be primed using Rustin’s Red Oxide Metal Primer.
Settlement: STIR WELL BEFORE USE. Ensure any sediment is thoroughly mixed in.
Clean-Up: Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Technical Information
Rustins Quick Dry Satin Paint White Technical Information
Barcode: 5015332450091
Weight: 0.59kg
To Download the Safety Data Sheet (PDF) for Rustins Quick Dry Satin Paint White Click HERE
Shelf-life/Storage: Many years in a cool, dry place if stored in original, tightly closed container. Do not store below 5° C. Protect from frost and extremes of temperature.
Hazards: Non-flammable. Avoid contact with eyes and skin. Eyes should be rinsed immediately contact occurs with plenty of water. Seek medical attention. Skin should be washed immediately after contact with plenty of soap and water or a proprietary skin cleanser. Use only in well ventilated areas. Keep container tightly closed and out of reach of
Product Reviews