Sylglas Flashing Tape Instructions for use

Sylglas Flashing tape is extremely simple to use. just follow the instructions, step by step, for a strong long lasting seal. it is recommended that you use gloves when applying.

1. Make sure the surface is clean and dry. Remove ALL LOOSE DUST and DIRT with a wire brush and soft broom.
2. Peel off 150mm of the interleaving. Press tape firmly into position and smooth down with a dry cloth. In cold, damp weather, keep tape warm or heat tape during application with a hair dryer or similar, to improve adhesion.
3. Repeat the process with 300 – 600mm sections at a time until you have completed the area to be covered
4. Once complete the tape offers a lead-like decorative finish.

Barcode: 5011768200330

Weight: 0.9 Kg

Click to Download the Sylglas Flashing Tape Technical Data Sheet Here