Whirlpool Spa Bath Maintenance Kit (3 Piece)

Usage Instructions: Hygienic Whirlpool Cleaner 

For whirlpools with internal and semi-automatic cleaning systems:

1. Fill the internal cleaning system with HG Whirlpool Cleaner.
2. Follow the directions for use of your whirlpool.

For whirlpools without internal cleaning systems:

1. Fill the whirlpool with warm water to 5cm above the highest openings of the water or air jets.
2. Pour 50-75 ml (1-1.5 cups) of HG Whirlpool Cleaner directly into the bath.
3. Turn on all the systems for 15 minutes.
4. Empty the bath and rinse with clean water.

Repeating the treatment with clean water is not necessary. To prevent the build up of dirt it is advisable to clean the whirlpool every 2-3 weeks, depending on usage.

Usage: 50-75 ml (1-1.5 cups) per use.

Attention: If you wish to remove the smell of HG Whirlpool Cleaner from the system, repeat the treatment with clean water.

If your whirlpool has not been cleaned for some time, use 250ml (5 cups), once only.

Do not allow any undiluted liquid to come into contact with calciferous and non-acid resistant surfaces such as marble.

Usage Instruction: Sanitiser Tablets (Average size bath)

1. After each use of the bath and before emptying, put 1 tablet into the bath water.

2. Switch on the system and let it run for 2-3 minutes.

3. Switch off the system and drain as normal.

4. Your whirlpool bath has now been effectively treated.

Weight: 2kg