Wykamol No More Damp Salt Neutraliser 5 Litre

Name: Wykamol No More Damp Salt Neutraliser 5 Litre
SKU: SNEUT
Availability: InStock

Product Code: SNEUT

Ask a question
about this product

£31.00 inc. VAT

£25.83 ex. VAT

RRP ~~£34.99~~ | SAVE £3.99RRP ~~£29.16~~ | SAVE £3.33

No More Damp Salt Neutraliser is a surface treatment used to neutralise the harmful effects of salt to protect your plaster finish, after a damp-proofing course application.

Product Features
- Neutralises the harmful actions of salt contamination
- Can be used in all types of masonry
- Use as a concentrate or diluted dependent on level of contamination
- Can be applied (internally only) to preserve internal plaster finish
- Can save considerable time and money on replastering
- 5 Litre
Description
Wykamol No More Damp Salt Neutraliser 5 Litre
No More Damp Salt Neutraliser is an aqueous solution based on Ethanoic Acid with a surfactant. It has been specifically developed to overcome the problem of salts in mineral building surfaces. Due to rising dampness, salt in the groundwater is absorbed into the masonry and subsequently into the interior plaster coat. The plaster work can loosen and must be removed to carry out treatment with Ultracure Damp-proofing Cream and Salt Neutraliser, followed by re-plastering with an appropriate salt-resistant product, such as No More Damp Renovation Plaster or Renderproof, to prevent further damage. In some situations where the type of salt within the masonry is such that the plasterwork remains in good condition, salt neutraliser can be applied directly to the original plaster, removing the immediate need for re-plastering.
- Neutralises the harmful actions of salt contamination
- Can be applied (internally only) to preserve the internal plaster finish
- Can be used in all types of masonry
- Use as a concentrate or diluted, dependent on the level of contamination
- Can save considerable time and money on replastering
- Can be used before replastering and after a DPC where plaster is not salvageable
- Finish with No More Damp Renovation Plaster or Renderproof
Coverage: Will vary dependent on the type of substrate and surface. 1 litre concentrate should treat 5m² to 10m²
How to use
Wykamol No More Damp Salt Neutraliser Usage Instructions
SUBSTRATE PREPARATION:
1. Brush away or remove all loose salts from the masonry.
2. a) Thoroughly soak the affected masonry with clean tap water. b) Do not soak plaster finish if original plaster is being maintained.
APPLICATION:
1. Apply Salt Neutraliser directly onto the internal wall, using brush or roller, in areas showing salt contamination.
2. Under most circumstances one coat or application is adequate.
3. When heavy salting on old brickwork is being treated use Salt Neutraliser as a concentrate (container strength).
4. On plasterwork, or on masonry with light salting, use Salt Neutraliser diluted with water up to a 50/50 dilution rate.
5. Some frothing may occur which is due to the reaction with the salts. Allow some time for the neutralising action to be completed.
APPLICATION LIMITATIONS:
Salt Neutraliser is only suitable for internal application. After a drying out period a white deposit may be left on the surface where the original efflorescing has taken place and is sometimes difficult to remove.
DECORATION:
If redecoration is to be applied on the treated masonry the area should be washed with water and allowed to dry. Do not redecorate until the treated areas are thoroughly dry.
Technical Information
Wykamol No More Damp Salt Neutraliser Technical Information
Barcode: 5060207861670
Weight: 5.1 kg
Storage: Keep only in the original container. Store in a cool, well ventilated place away from children and direct sunlight. Store locked-up. Keep cool. Keep away from oxidizing agents,strong acids and strong bases
Shelf Life:12 months in well sealed container
To Download the Safety Data Sheet (PDF) for Wykamol No More Damp Salt Neutraliser Click HERE
Product Reviews