Associated Products
Antiquax Original Wax Polish 100ml
Antiquax Original Wax Polish is a superlative wax polish blended from the finest beeswax and carnauba wax for use on all fine natural woods and antique.
Antiquax Original Wax Polish 100ml
Also Available in Antiquax Original Wax Polish 250ml, Antiquax Original Wax Polish 500ml
and Antiquax Original Wax Polish 5 Litre
Antiquax Original Wax Polish Usage Instructions
Preparation: The surface must be clean and dry. Antiquax Original Wax Polish can be used on previously waxed surfaces. For best results initially clean the surface with Antiquax Furniture Cleaner.
Application: Apply sparingly, using a soft lint free cloth, in a circular motion. Work well into the grain and allow to dry to a light haze. Remove by polishing in a circular motion using a clean dry cloth.
Coats: One coat is usually sufficient but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying.
Re-coating Time: Re-apply if required after a few minutes.
Application Temp: Ideally 15-25ºC
Maintenance: Re-apply when necessary.
Compatibility: Compatible with most timber finishes. If in doubt check on an inconspicuous test area. For best results and to prevent a blotchy appearance, timber should be previously sealed with a varnish, oil or sanding sealer.
Clean-Up: Hands and application cloths can be cleaned in warn soapy water.
Antiquax Original Wax Polish Technical Information
Barcode: 5011807001980
Weight: 0.12kg
Shelf-life/Storage: A very long time if stored in original sealed container in a cool dry place.
Hazards: Flammable. Keep away from children. Keep container tightly closed. Keep away from all sources of ignition. No smoking.
To Download the Safety Data Sheet (PDF) for Antiquax Original Wax Polish Click HERE
Antiquax Original Wax Polish 100ml
Also Available in Antiquax Original Wax Polish 250ml, Antiquax Original Wax Polish 500ml
and Antiquax Original Wax Polish 5 Litre
Antiquax Original Wax Polish Usage Instructions
Preparation: The surface must be clean and dry. Antiquax Original Wax Polish can be used on previously waxed surfaces. For best results initially clean the surface with Antiquax Furniture Cleaner.
Application: Apply sparingly, using a soft lint free cloth, in a circular motion. Work well into the grain and allow to dry to a light haze. Remove by polishing in a circular motion using a clean dry cloth.
Coats: One coat is usually sufficient but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying.
Re-coating Time: Re-apply if required after a few minutes.
Application Temp: Ideally 15-25ºC
Maintenance: Re-apply when necessary.
Compatibility: Compatible with most timber finishes. If in doubt check on an inconspicuous test area. For best results and to prevent a blotchy appearance, timber should be previously sealed with a varnish, oil or sanding sealer.
Clean-Up: Hands and application cloths can be cleaned in warn soapy water.
Antiquax Original Wax Polish Technical Information
Barcode: 5011807001980
Weight: 0.12kg
Shelf-life/Storage: A very long time if stored in original sealed container in a cool dry place.
Hazards: Flammable. Keep away from children. Keep container tightly closed. Keep away from all sources of ignition. No smoking.
To Download the Safety Data Sheet (PDF) for Antiquax Original Wax Polish Click HERE
Associated Products