image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Case of 6 x HG Mould Remover Foam Spray 500ml

Product Code: HG260FOAMcase
£35.99
RRP £45.99 | SAVE £10.00
Item in Stock

HG Mould Remover Foam Spray immediately destroys mould from damp places - inside and outside.

Product Features:
Foam formula has a less penetrating odour
Can be more easily aimed at the mould
Foam formula stays in place longer, making it more effective for a longer
Case of 6 x 500ml

HG Mould Remover Foam Spray 500ml

HG Hagesan Mould Remover Foam Spray immediately destroys mould from damp places - inside and outside. The unique foam formula has a less penetrating odour, can be more easily aimed at the mould and is less likely to splash.
The foam formula stays in place longer, making it more effective for a longer period of time.

For cleaning tile and plaster walls (also suitable for marble and other natural stone) for joints in the bathroom, shower, toilet, kitchen, cellar, basement, sauna, swimming pool, garage and shed.
Also cleans facade, balcony, planters, garden statues, etc.

Size: Case of 6 x 500ml

Also Available Individually See: HG Mould Remover Foam Spray 500ml

HG Mould Remover Foam Spray Usage Instructions:

Remove the locking clip before use.

If you have used the bottle before, remnants of the liquid may be left in the nozzle, causing it to work less well when you re-use the bottle. Before re-using the bottle, we recommend you rinse the nozzle with hot tap water, e.g. by running the water through the air holes at the side of the foam pipe. The product has a bleaching effect, so in case of doubt, start by testing it in an unobtrusive place.
Do not remove mould first. Press the nozzle at the front side and turn a quarter.
Spray the surface from a distance of 3-5 cm. In case of persistent dirt, spray again after 30 minutes and leave it to work for another 30 minutes.
Clean the sprayed surface with water and a sponge. Wash off elastic joints (e.g. silicone sealant) after approx 30 minutes and spray again.
Turn the nozzle backwards a quarter turn after use to the blocking position.
For cleaning large surface areas with green deposits, we recommend HG Algae and Mould remover

Dosage:
2-3m² wall surface, 6-8m² tile joints.

HG Mould Remover Foam Technical Information:

Barcode: 8711577213831
Weight: 3.5kg

Attention:
We recommend you ventilate well during use and wear rubber/plastic gloves.
Prevent splashing on your clothing, gloss paint or slats. Rinse immediately with water on contact.
Prevent contact with metals, such as prints on decorative strips, aluminium and stainless steel.
Do not treat coloured surfaces.
We do not recommend using this product on ceilings with decorative plaster.

Load more reviews

HG Mould Remover Foam Spray 500ml

HG Hagesan Mould Remover Foam Spray immediately destroys mould from damp places - inside and outside. The unique foam formula has a less penetrating odour, can be more easily aimed at the mould and is less likely to splash.
The foam formula stays in place longer, making it more effective for a longer period of time.

For cleaning tile and plaster walls (also suitable for marble and other natural stone) for joints in the bathroom, shower, toilet, kitchen, cellar, basement, sauna, swimming pool, garage and shed.
Also cleans facade, balcony, planters, garden statues, etc.

Size: Case of 6 x 500ml

Also Available Individually See: HG Mould Remover Foam Spray 500ml

HG Mould Remover Foam Spray Usage Instructions:

Remove the locking clip before use.

If you have used the bottle before, remnants of the liquid may be left in the nozzle, causing it to work less well when you re-use the bottle. Before re-using the bottle, we recommend you rinse the nozzle with hot tap water, e.g. by running the water through the air holes at the side of the foam pipe. The product has a bleaching effect, so in case of doubt, start by testing it in an unobtrusive place.
Do not remove mould first. Press the nozzle at the front side and turn a quarter.
Spray the surface from a distance of 3-5 cm. In case of persistent dirt, spray again after 30 minutes and leave it to work for another 30 minutes.
Clean the sprayed surface with water and a sponge. Wash off elastic joints (e.g. silicone sealant) after approx 30 minutes and spray again.
Turn the nozzle backwards a quarter turn after use to the blocking position.
For cleaning large surface areas with green deposits, we recommend HG Algae and Mould remover

Dosage:
2-3m² wall surface, 6-8m² tile joints.

HG Mould Remover Foam Technical Information:

Barcode: 8711577213831
Weight: 3.5kg

Attention:
We recommend you ventilate well during use and wear rubber/plastic gloves.
Prevent splashing on your clothing, gloss paint or slats. Rinse immediately with water on contact.
Prevent contact with metals, such as prints on decorative strips, aluminium and stainless steel.
Do not treat coloured surfaces.
We do not recommend using this product on ceilings with decorative plaster.

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960