image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Rustins All Star Wood Treatment Clear 1 Litre

Product Code: ASWOOTRE1000
£9.99
RRP £10.45 | SAVE £0.46
Item in Stock

Rustins All Star Wood Treatment is a water based treatment against wood boring insects and wood rotting fungi.

Product Features:
All Purpose Treatment
Long lasting protection
Low Odour
For Interior and Exterior use
Prevents reinfestation of wood boring insects

Rustins All Star Wood Treatment Clear 1 Litre

Rustins All Star Wood Treatment is a preventative treatment against wood boring beetles, termites and wood rotting fungi. It is a water based, low odour, non-flammable product based on optimised formulation technology. The ultra fine particle size allows deep penetration of the treatment to take place so the performance of the product is much greater than standard wood treatment products. It is non-flammable and quick drying and can be applied to wet or dry timbers.

Also ideal for a curative treatment against wood boring beetles. For use on hard and soft wood. See usage instructions below for coverage guidance.

Size: 1 Litre

Also Available in 5 Litre Size

Rustins All Star Wood Treatment Clear Usage Instructions

Preparation: Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp but the product should not be applied to decayed wood which will need to be removed and replaced.
Application: Shake well and stir before use. Apply two coats using a brush or low pressure spray. EXTERIOR application must be by BRUSH ONLY. Depending on the drying conditions, the second application should be applied before the first is dry. Ensure all end grain is thoroughly soaked as this is especially prone to water ingress and resulting decay.
Re- Coating Time: Temperature and humidity will affect the rate of drying. it is important that after the first application, the surface is not allowed to dry out and ideally should be damp when the second application is carried out. The timber should be allowed to dry for 48 hours before over-coating.
Coverage: Apply at a rate of 100ml / m2 .(1 Litre per 10 m2):
For a preventative use against wood boring beetles.

Apply at a rate of 152.8 - 200ml / m2. (1 Litre per 5 m2):
For a preventative use against wood rotting fungi.

Apply at a rate of 200ml / m2 (1 Litre per 5 m2):
For a preventative use against wood boring beetles, termites and wood rotting fungi.

Apply at a rate of 300ml / m2 (1 Litre per 3.3m2):
For Curative use against wood boring beetles.

Cleaning: Remove as much product as possible and return to this container. Brushes should then be cleaned immediately with water.

Rustins All Star Wood Treatment Clear Technical Information

Barcode: 5015332003709
Weight:
1.09kg

Load more reviews

Rustins All Star Wood Treatment Clear 1 Litre

Rustins All Star Wood Treatment is a preventative treatment against wood boring beetles, termites and wood rotting fungi. It is a water based, low odour, non-flammable product based on optimised formulation technology. The ultra fine particle size allows deep penetration of the treatment to take place so the performance of the product is much greater than standard wood treatment products. It is non-flammable and quick drying and can be applied to wet or dry timbers.

Also ideal for a curative treatment against wood boring beetles. For use on hard and soft wood. See usage instructions below for coverage guidance.

Size: 1 Litre

Also Available in 5 Litre Size

Rustins All Star Wood Treatment Clear Usage Instructions

Preparation: Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp but the product should not be applied to decayed wood which will need to be removed and replaced.
Application: Shake well and stir before use. Apply two coats using a brush or low pressure spray. EXTERIOR application must be by BRUSH ONLY. Depending on the drying conditions, the second application should be applied before the first is dry. Ensure all end grain is thoroughly soaked as this is especially prone to water ingress and resulting decay.
Re- Coating Time: Temperature and humidity will affect the rate of drying. it is important that after the first application, the surface is not allowed to dry out and ideally should be damp when the second application is carried out. The timber should be allowed to dry for 48 hours before over-coating.
Coverage: Apply at a rate of 100ml / m2 .(1 Litre per 10 m2):
For a preventative use against wood boring beetles.

Apply at a rate of 152.8 - 200ml / m2. (1 Litre per 5 m2):
For a preventative use against wood rotting fungi.

Apply at a rate of 200ml / m2 (1 Litre per 5 m2):
For a preventative use against wood boring beetles, termites and wood rotting fungi.

Apply at a rate of 300ml / m2 (1 Litre per 3.3m2):
For Curative use against wood boring beetles.

Cleaning: Remove as much product as possible and return to this container. Brushes should then be cleaned immediately with water.

Rustins All Star Wood Treatment Clear Technical Information

Barcode: 5015332003709
Weight:
1.09kg

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960