image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Rustins Plastic Coating and Hardener Gloss Finish 1 Litre

Product Code: PCGL1000
£19.99
RRP £26.24 | SAVE £6.25
Item in Stock

Rustins Plastic Coating and Hardener Gloss Finish is a two-part clear cold cure lacquer for use on wood, hardboard, cork and plastic laminates. 

Product Features:
Two-part cold cure lacquer
For use on wood, hardboard, cork and plastic laminates
Does not yellow or craze with age
Resistant to heat, solvents and abrasives
Conforms to The Articles in Contact with Food Regulations

Rustins Plastic Coating and Hardener Gloss Finish 1 Litre

Rustins Plastic Coating and Hardener Gloss is a two-part clear cold cure lacquer for use on wood, hardboard, cork and plastic laminates. Extremely good adhesion, resistant to heat, solvents and abrasion. Can be burnished to a mirror like gloss or rubbed down to a smooth, satin finish with steel wool and wax. An excellent finish for marquetry as it does not darken light coloured veneers and does not yellow or craze on ageing. Hard-dry within 2 hours of application.

Intended Use: Intended use bare wood, veneered wood, hardboard, MDF and unsealed cork. For interior use only.
Type: A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd and reinforced with malamine. The finish is highly durable, heat resistant, resistant to impact,  abrasion and solvents.
Special Features: Enhances the colour of the wood. May be burnished to give mirror like finish using Rustins Burnishing Cream. The coating is almost colourless, but some woods may darken slightly.

Rustins Plastic Coating conforms to The Articles in Contact with Food Regulations.
Coverage 13-15m² per Litre per coat. This can vary depending on the absorbency of the wood.

Finish: Gloss

Size: 1 Litre 
Also Available: Rustins Plastic Coating and Hardener Gloss Finish 250ml and Rustins Plastic Coating and Hardener Gloss Finish 4 Litre

To Download the Product Information Sheet (PDF) for Rustins Plastic Coating and Hardener Gloss Finish Click HERE

Rustins Plastic Coating and Hardener Gloss Finish Usage Instructions

Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants. Nail holes and small cracks may be filled with Rustins Woodfiller. Bare wood may be dyed before coating with Rustins Wood Dye. Other brands of dye & stain should be tested for compatibility. Do not apply Knotting or Sanding Sealer.
Application: The mixing ratio is 1 part Hardener to 4 parts Coating by volume. Once mixed, it may be used for up to two days, if covered and kept cool. Use a brush, roller or lambs wool pad and apply evenly and liberally, finishing in the direction of the grain.
Coats: Two coats are usually sufficient on hardwood. Softwoods and cork may require a minimum of 3 coats, depending on the absorbency of wood.
Drying Time: Generally touch-dry within 30 minutes–1 hour, depending on the temperature and humidity.
Re-coating Time: May be re-coated after 1 hour.
Application Temp. Ideally 15-25°C. Do not use below 15°C, or in conditions of high humidity.
Maintenance: The surface may be kept clean by wiping with a mild detergent solution. Worn areas may be re-coated once cleaned and sanded, to provide a key.
Compatibility: The coating may be used over Rustin's Wood Filler, Rustin's Wood Dye and wood may be bleached before coating, with Rustin’s Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye & stain, test first for compatibility.
Settlement: STIR WELL BEFORE USE
Clean-Up Clean equipment immediately after use with Rustins Plastic Coating Thinners or Rustins Cellulose Thinners, as once hardened, the coating cannot be removed.

Rustins Plastic Coating and Hardener Gloss Finish Technical Information

Barcode: 5015332400058
Weight: 1.20 Kg

Shelf-life/Storage: Many years if stored in original, tightly closed containers in cool conditions.
Hazards: Highly flammable. Keep away from sources of ignition- no smoking. Avoid contact with skin and eyes. Do not empty into drains. Wear suitable gloves. Keep container tightly closed. Apply in well ventilated area. 

To Download the Safety Data Sheet (PDF) for Rustins Plastic Coating and Hardener Gloss Finish Click HERE

Load more reviews

Rustins Plastic Coating and Hardener Gloss Finish 1 Litre

Rustins Plastic Coating and Hardener Gloss is a two-part clear cold cure lacquer for use on wood, hardboard, cork and plastic laminates. Extremely good adhesion, resistant to heat, solvents and abrasion. Can be burnished to a mirror like gloss or rubbed down to a smooth, satin finish with steel wool and wax. An excellent finish for marquetry as it does not darken light coloured veneers and does not yellow or craze on ageing. Hard-dry within 2 hours of application.

Intended Use: Intended use bare wood, veneered wood, hardboard, MDF and unsealed cork. For interior use only.
Type: A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd and reinforced with malamine. The finish is highly durable, heat resistant, resistant to impact,  abrasion and solvents.
Special Features: Enhances the colour of the wood. May be burnished to give mirror like finish using Rustins Burnishing Cream. The coating is almost colourless, but some woods may darken slightly.

Rustins Plastic Coating conforms to The Articles in Contact with Food Regulations.
Coverage 13-15m² per Litre per coat. This can vary depending on the absorbency of the wood.

Finish: Gloss

Size: 1 Litre 
Also Available: Rustins Plastic Coating and Hardener Gloss Finish 250ml and Rustins Plastic Coating and Hardener Gloss Finish 4 Litre

To Download the Product Information Sheet (PDF) for Rustins Plastic Coating and Hardener Gloss Finish Click HERE

Rustins Plastic Coating and Hardener Gloss Finish Usage Instructions

Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants. Nail holes and small cracks may be filled with Rustins Woodfiller. Bare wood may be dyed before coating with Rustins Wood Dye. Other brands of dye & stain should be tested for compatibility. Do not apply Knotting or Sanding Sealer.
Application: The mixing ratio is 1 part Hardener to 4 parts Coating by volume. Once mixed, it may be used for up to two days, if covered and kept cool. Use a brush, roller or lambs wool pad and apply evenly and liberally, finishing in the direction of the grain.
Coats: Two coats are usually sufficient on hardwood. Softwoods and cork may require a minimum of 3 coats, depending on the absorbency of wood.
Drying Time: Generally touch-dry within 30 minutes–1 hour, depending on the temperature and humidity.
Re-coating Time: May be re-coated after 1 hour.
Application Temp. Ideally 15-25°C. Do not use below 15°C, or in conditions of high humidity.
Maintenance: The surface may be kept clean by wiping with a mild detergent solution. Worn areas may be re-coated once cleaned and sanded, to provide a key.
Compatibility: The coating may be used over Rustin's Wood Filler, Rustin's Wood Dye and wood may be bleached before coating, with Rustin’s Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye & stain, test first for compatibility.
Settlement: STIR WELL BEFORE USE
Clean-Up Clean equipment immediately after use with Rustins Plastic Coating Thinners or Rustins Cellulose Thinners, as once hardened, the coating cannot be removed.

Rustins Plastic Coating and Hardener Gloss Finish Technical Information

Barcode: 5015332400058
Weight: 1.20 Kg

Shelf-life/Storage: Many years if stored in original, tightly closed containers in cool conditions.
Hazards: Highly flammable. Keep away from sources of ignition- no smoking. Avoid contact with skin and eyes. Do not empty into drains. Wear suitable gloves. Keep container tightly closed. Apply in well ventilated area. 

To Download the Safety Data Sheet (PDF) for Rustins Plastic Coating and Hardener Gloss Finish Click HERE

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960