image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Rustins Polyurethane Varnish Gloss Walnut 250ml

Product Code: POGW250
£5.39
RRP £6.08 | SAVE £0.69
Item in Stock

Rustins Polyurethane Varnish Gloss Walnut stains and varnishes in one operation.

Product Features:
For interior use
Stains and varnishes in one
Tough and durable
Resistant to oil, water and many chemicals
High abrasion and mechanical impact resistance

Rustins Polyurethane Varnish Gloss Walnut 250ml

Rustins Polyurethane Varnish Gloss Walnut is an attractive natural wood shade in a gloss finish that stains and varnishes in one operation.

Intended Use Bare wood, hardboard, MDF and unsealed cork. Interior use only. For floors, use Rustins Polyurethane Floor Sealer.
Type: A high build, air-drying coloured polyurethane varnish. The finish produced is tough, durable and resistant to oil, water and many chemicals.Special Features: Stains and varnishes in one. High abrasion and mechanical impact resistance.
Coverage 14-16m² per Litre, 1 coat, depending on the absorbency of the surface.

Colour: Walnut - Also available in Mahogany, Oak, Dark Oak, Pine, Teak and Antique Pine

Finish: Gloss - also available in Satin

Size: 250ml

Also Available in 500ml and 1 Litre Sizes

Rustins Polyurethane Varnish Gloss Walnut Usage Instructions

Preparation The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. Remove wax by rubbing with White Spirit and a plastic souring pad and wipe away whilst still wet. Cracks may be filled with Rustins Wood filler.
Application Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with White Spirit (1 part to 8 parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats.
Coats 2 coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats.Drying Time Touch dry in approximately 2-4 hours, depending on the temperature and humidity.Re-coating Time Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Maintenance The varnish will take about 24 hours to dry fully. Afterwards, the surface may be cleaned by wiping with a mild detergent solution when necessary. To restore gloss, wax polish may be applied. Worn areas may be re-coated once cleaned, de-waxed and lightly sanded to provide a key.
Compatibility The varnish may be used over the following Rustins products; Rustins Wood filler, Grain filler and Rustins Polyurethane Varnish. The colour will darken with additional coats. A lighter shade can be obtained by diluting with White Spirit. Rustins Polyurethane Clear Varnish may be applied over Varnish Stain without altering the colour.
Settlement STIR WELL BEFORE USE. Satin and Matt finishes may dry glossy if not thoroughly stirred.
Clean-Up Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer.

Rustins Polyurethane Varnish Gloss Walnut Technical Information

Barcode: 5015332436026
Weight: 0.35kg

Shelf-life/Storage: Many years if stored in original, tightly closed container in cool, dry conditions.
Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition-no smoking. Avoid contact with eyes and skin, Use only in well ventilated areas.

Load more reviews

Rustins Polyurethane Varnish Gloss Walnut 250ml

Rustins Polyurethane Varnish Gloss Walnut is an attractive natural wood shade in a gloss finish that stains and varnishes in one operation.

Intended Use Bare wood, hardboard, MDF and unsealed cork. Interior use only. For floors, use Rustins Polyurethane Floor Sealer.
Type: A high build, air-drying coloured polyurethane varnish. The finish produced is tough, durable and resistant to oil, water and many chemicals.Special Features: Stains and varnishes in one. High abrasion and mechanical impact resistance.
Coverage 14-16m² per Litre, 1 coat, depending on the absorbency of the surface.

Colour: Walnut - Also available in Mahogany, Oak, Dark Oak, Pine, Teak and Antique Pine

Finish: Gloss - also available in Satin

Size: 250ml

Also Available in 500ml and 1 Litre Sizes

Rustins Polyurethane Varnish Gloss Walnut Usage Instructions

Preparation The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. Remove wax by rubbing with White Spirit and a plastic souring pad and wipe away whilst still wet. Cracks may be filled with Rustins Wood filler.
Application Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with White Spirit (1 part to 8 parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats.
Coats 2 coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats.Drying Time Touch dry in approximately 2-4 hours, depending on the temperature and humidity.Re-coating Time Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Maintenance The varnish will take about 24 hours to dry fully. Afterwards, the surface may be cleaned by wiping with a mild detergent solution when necessary. To restore gloss, wax polish may be applied. Worn areas may be re-coated once cleaned, de-waxed and lightly sanded to provide a key.
Compatibility The varnish may be used over the following Rustins products; Rustins Wood filler, Grain filler and Rustins Polyurethane Varnish. The colour will darken with additional coats. A lighter shade can be obtained by diluting with White Spirit. Rustins Polyurethane Clear Varnish may be applied over Varnish Stain without altering the colour.
Settlement STIR WELL BEFORE USE. Satin and Matt finishes may dry glossy if not thoroughly stirred.
Clean-Up Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer.

Rustins Polyurethane Varnish Gloss Walnut Technical Information

Barcode: 5015332436026
Weight: 0.35kg

Shelf-life/Storage: Many years if stored in original, tightly closed container in cool, dry conditions.
Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition-no smoking. Avoid contact with eyes and skin, Use only in well ventilated areas.

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960