Associated Products
Rustins Quick Dry Chalky Portobello Pink Paint 250ml
Rustins Quick Dry Chalky Portobello Pink Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish.
Rustins Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish. Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over previously coated surface, test a small area for compatibility.
Intended Use: For use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints. For interior use.
Get the shabby chic look by painting your furniture with multiple coats then distressing it by lightly sanding down small areas using fine sandpaper or Rustins 0000 Steel Wool. Contains wax and does not finger mark.
Type: Formulated with water borne acrylic emulsion, pigments and extenders to provide excellent opacity and a smooth chalky surface feel.
Coverage Approximately 13m² per Litre, 1 coat, depending on the absorbency of the surface.
Colour: Portobello Pink - also available in Kenwood Cream, Blenheim Blue, Georgian Grey, Savoy Sage, Windsor White
Size: 250ml
Also Available in 500ml Size
Preparation: Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When used to prime bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming.
Application Apply liberally and evenly with a synthetic short fibre brush or roller. For brush application, the primer coat may be thinned by mixing 5 parts with 1 part water if necessary.
Coats One coat over primed surfaces. A minimum of 2 coats are required on bare substrates.
Drying Time Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Barcode: 5015332001194
Weight: 0.3kg
Rustins Chalky Finish Paint is designed to revive and give your furniture a new lease of life. Suitable for use on interior work, it contains wax and dries to a velvety flat matt finish. Very little preparation is required to receive the desired look as it can be painted over most previously coated items. If using over previously coated surface, test a small area for compatibility.
Intended Use: For use on bare wood, hardboard, MDF, plaster, brickwork and cement to produce a smooth touch flat matt finish. (Not for direct application to metals). Can also be used as a finish coat over existing wood and metal primers and paints. For interior use.
Get the shabby chic look by painting your furniture with multiple coats then distressing it by lightly sanding down small areas using fine sandpaper or Rustins 0000 Steel Wool. Contains wax and does not finger mark.
Type: Formulated with water borne acrylic emulsion, pigments and extenders to provide excellent opacity and a smooth chalky surface feel.
Coverage Approximately 13m² per Litre, 1 coat, depending on the absorbency of the surface.
Colour: Portobello Pink - also available in Kenwood Cream, Blenheim Blue, Georgian Grey, Savoy Sage, Windsor White
Size: 250ml
Also Available in 500ml Size
Preparation: Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When used to prime bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming.
Application Apply liberally and evenly with a synthetic short fibre brush or roller. For brush application, the primer coat may be thinned by mixing 5 parts with 1 part water if necessary.
Coats One coat over primed surfaces. A minimum of 2 coats are required on bare substrates.
Drying Time Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Barcode: 5015332001194
Weight: 0.3kg
Associated Products