Rustins Quick Drying White Primer and Undercoat 250ml
Rustins Quick Drying White Primer and Undercoat is for use on interior and exterior work. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement.
Rustins Quick Drying White Primer and Undercoat is for use on interior and exterior work. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based finishing paints. Clean brushes in water. Available in Grey and White.
Intended Use: As a primer for use on bare wood, hardboard, MDF, plaster, brickwork and cement. (Not for priming metals). Can also be used as an undercoat over existing wood and metal primers and over existing paints. For interior and exterior use.
Type: Formulated with water borne acrylic emulsion, pigments and extenders to provide excellent opacity. Available in matt white and matt grey.
Special Features: Quick drying. Excellent covering power. Low odour. Clean brushes in water. One coat is usually sufficient to completely cover previous paints and provides the base for new applications.
Coverage Approximately 13 sq.m per litre, 1 coat, depending on the absorbency of the surface.
Colour: White
Also Available in Grey
Size: 250ml
Also Available in 500ml, 1 Litre and 2.5 Litre Sizes
Preparation Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When priming bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming. As an undercoat over existing paint, the surface must be cleaned and lightly sanded to provide a key before application.
Compatibility Compatible with many paint products, such as Rustin’s White Gloss Paint and Rustin’s Quick-Drying Radiator Enamel. Not for use as a metal primer. Metals must be primed using Rustin’s Red Oxide Metal Primer.
Application Apply liberally and evenly with a synthetic fibre brush or roller. For brush application, if necessary, the primer coat may be thinned by mixing 5 parts with 1 part water. Do not thin when applying as undercoat.
Clean up Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Settlement STIR WELL BEFORE USE. Ensure any sediment is thoroughly mixed in.
Coats A minimum of 2 coats are required.
Drying Time Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Barcode: 5015332590018
Weight: 0.27kg
Rustins Quick Drying White Primer and Undercoat is for use on interior and exterior work. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based finishing paints. Clean brushes in water. Available in Grey and White.
Intended Use: As a primer for use on bare wood, hardboard, MDF, plaster, brickwork and cement. (Not for priming metals). Can also be used as an undercoat over existing wood and metal primers and over existing paints. For interior and exterior use.
Type: Formulated with water borne acrylic emulsion, pigments and extenders to provide excellent opacity. Available in matt white and matt grey.
Special Features: Quick drying. Excellent covering power. Low odour. Clean brushes in water. One coat is usually sufficient to completely cover previous paints and provides the base for new applications.
Coverage Approximately 13 sq.m per litre, 1 coat, depending on the absorbency of the surface.
Colour: White
Also Available in Grey
Size: 250ml
Also Available in 500ml, 1 Litre and 2.5 Litre Sizes
Preparation Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When priming bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Filler after priming. As an undercoat over existing paint, the surface must be cleaned and lightly sanded to provide a key before application.
Compatibility Compatible with many paint products, such as Rustin’s White Gloss Paint and Rustin’s Quick-Drying Radiator Enamel. Not for use as a metal primer. Metals must be primed using Rustin’s Red Oxide Metal Primer.
Application Apply liberally and evenly with a synthetic fibre brush or roller. For brush application, if necessary, the primer coat may be thinned by mixing 5 parts with 1 part water. Do not thin when applying as undercoat.
Clean up Clean brushes and hands immediately after use with water. If dried on, clean equipment and brushes with Rustin’s Brush Restorer.
Settlement STIR WELL BEFORE USE. Ensure any sediment is thoroughly mixed in.
Coats A minimum of 2 coats are required.
Drying Time Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Barcode: 5015332590018
Weight: 0.27kg