Associated Products
Rustins Sugar Soap Powder Crystals 450g
Rustins Sugar Soap Powder Crystals are a concentrated active performance cleaner. Mix with water to prepare the solution for general cleaning and preparation prior to painting.
Rustins Sugar Soap Powder Crystals are a concentrated active performance cleaner. Mix with water to prepare the solution for general cleaning and preparation prior to painting. It cuts through grease and dirt leaving surfaces clean. Non-caustic and non-hazardous. Excellent general household cleaner suitable for most surfaces.
Type: The concentrated active component of phosphate-based surface cleaner.
Intended Use: For cleaning and preparing the surface prior repainting. Cuts though grease and dirt leaving the surface clean so an applied coat of paint will adhere.
Special Features: Non-caustic, non-hazardous. Excellent for general household cleaning. It is suitable for use on paintwork, Vinyl wall covering and enamel surfaces Removes grease, dirt and nicotine stains.
Coverage: 450g of the concentrate will provide 10 Litres of solution suitable for cleaning surfaces.
Unsuitable on textiles, fabrics or soft furnishings.
Size: 450g
Also Available in a Ready to Use Spray and 500ml Size
Product safety data sheet can be downloaded (PDF) HERE
Preparation Wear rubber glovesand eye protection when using Rustins Sugar Soap Powder Crystals. Protect floor coverings and fabrics from spillage.
FOR SURFACE PREPARATION: Dissolve 225 grams (1/2 of container) of Rustins Sugar Soap Powder Crystalsinto 5 litres of warm water and stir until fully incorporated.
FOR GENERAL CLEANING: Dissolve 50 grams (4 tablespoons) of Rustins Sugar Soap Powder Crystals into 2.5 litres of warm water and stir until fully incorporated. :
Application Apply the sugar soap solution using a sponge or cloth working from top to bottom then rinse off with clean waterand allow to dry thoroughly. Mop up any spillages immediately with a cloth.
Coats Repeat until surface is clean.
Drying Time N/A
Re-coating Time Once the water has evaporated the surface will be ready for painting.
Application Temp. Ideally 15-20 C.
Maintenance Repeat as necessary
Compatibility Unsuitable for use on textiles, fabrics or soft furnishings, which need to be covered before working in that area. Wipe up spillages immediately otherwise spotting may occur. If in doubt about surface compatability on an inconspicuous area first.
Barcode: 5015332002504
Weight: 0.47kg
Rustins Sugar Soap Powder Crystals are a concentrated active performance cleaner. Mix with water to prepare the solution for general cleaning and preparation prior to painting. It cuts through grease and dirt leaving surfaces clean. Non-caustic and non-hazardous. Excellent general household cleaner suitable for most surfaces.
Type: The concentrated active component of phosphate-based surface cleaner.
Intended Use: For cleaning and preparing the surface prior repainting. Cuts though grease and dirt leaving the surface clean so an applied coat of paint will adhere.
Special Features: Non-caustic, non-hazardous. Excellent for general household cleaning. It is suitable for use on paintwork, Vinyl wall covering and enamel surfaces Removes grease, dirt and nicotine stains.
Coverage: 450g of the concentrate will provide 10 Litres of solution suitable for cleaning surfaces.
Unsuitable on textiles, fabrics or soft furnishings.
Size: 450g
Also Available in a Ready to Use Spray and 500ml Size
Product safety data sheet can be downloaded (PDF) HERE
Preparation Wear rubber glovesand eye protection when using Rustins Sugar Soap Powder Crystals. Protect floor coverings and fabrics from spillage.
FOR SURFACE PREPARATION: Dissolve 225 grams (1/2 of container) of Rustins Sugar Soap Powder Crystalsinto 5 litres of warm water and stir until fully incorporated.
FOR GENERAL CLEANING: Dissolve 50 grams (4 tablespoons) of Rustins Sugar Soap Powder Crystals into 2.5 litres of warm water and stir until fully incorporated. :
Application Apply the sugar soap solution using a sponge or cloth working from top to bottom then rinse off with clean waterand allow to dry thoroughly. Mop up any spillages immediately with a cloth.
Coats Repeat until surface is clean.
Drying Time N/A
Re-coating Time Once the water has evaporated the surface will be ready for painting.
Application Temp. Ideally 15-20 C.
Maintenance Repeat as necessary
Compatibility Unsuitable for use on textiles, fabrics or soft furnishings, which need to be covered before working in that area. Wipe up spillages immediately otherwise spotting may occur. If in doubt about surface compatability on an inconspicuous area first.
Barcode: 5015332002504
Weight: 0.47kg
Associated Products