Wudcare Floorboard Gap And Joint Filler 1 Litre
Product Code: WCFBGF1000
£9.99
RRP £11.99 | SAVE £2.00
Item in Stock
Wudcare Floorboard Gap And Joint Filler is for use in combination with saw or sanding dust from carpentry work as a colour-matched filler for gaps between flooring boards and joints.
Product Features:
A flexible, highly bodied acrylic emulsion for filling properties
Quick drying and low odour
Easy to sand
Fills the gap and doesn't shrink
Matches the colour of the wood
Wudcare Floorboard Gap And Joint Filler 1 Litre
Wudcare Floorboard Gap and Joint Filler is based on a flexible water-borne, non-yellowing acrylic resin. For use in combination with saw or sanding dust from carpentry work as a colour-matched filler for gaps between flooring boards and joints. A flexible, highly bodied acrylic emulsion for filling properties. For filling gaps or joints in woodwork up to 2 mm in combination with a mixture of saw/sanding dust to optimise colour match with original timber.
Note: unsuitable for gaps wider than 2 mm. Do not use on gaps within planks or on end-grain floors.
+ Non-yellowing, water-washable
+ Quick drying and low odour
+ Easy to sand
+ Fills the gap and doesn't shrink
+ Matches the colour of the wood
+ Can be coated with any Rustins products
Size: 1 Litre
Wudcare Floorboard Gap And Joint Filler Usage Instructions
The surface must be clean, sanded smooth and free of wax, dust and contaminants.
1. Mix the Wudcare Gap and Joint Filler to a thick cream-like consistency with saw dust saved from carpentry work.
2. Stir well before use.Apply using a stainless steel trowel across whole floor. Once hard-dried, sand floor smooth.
3. One or two coats as required. Minimum 20 minutes before sanding, depending on filler depth and consistency.
Clean equipment with water immediately after finishing work. If product is allowed to dry on, clean equipment with Rustins Brush Restorer.
Barcode: 5015332002290
Weight: 1.12kg
Load more reviews
Wudcare Floorboard Gap And Joint Filler 1 Litre
Wudcare Floorboard Gap and Joint Filler is based on a flexible water-borne, non-yellowing acrylic resin. For use in combination with saw or sanding dust from carpentry work as a colour-matched filler for gaps between flooring boards and joints. A flexible, highly bodied acrylic emulsion for filling properties. For filling gaps or joints in woodwork up to 2 mm in combination with a mixture of saw/sanding dust to optimise colour match with original timber.
Note: unsuitable for gaps wider than 2 mm. Do not use on gaps within planks or on end-grain floors.
+ Non-yellowing, water-washable
+ Quick drying and low odour
+ Easy to sand
+ Fills the gap and doesn't shrink
+ Matches the colour of the wood
+ Can be coated with any Rustins products
Size: 1 Litre
Wudcare Floorboard Gap And Joint Filler Usage Instructions
The surface must be clean, sanded smooth and free of wax, dust and contaminants.
1. Mix the Wudcare Gap and Joint Filler to a thick cream-like consistency with saw dust saved from carpentry work.
2. Stir well before use.Apply using a stainless steel trowel across whole floor. Once hard-dried, sand floor smooth.
3. One or two coats as required. Minimum 20 minutes before sanding, depending on filler depth and consistency.
Clean equipment with water immediately after finishing work. If product is allowed to dry on, clean equipment with Rustins Brush Restorer.
Barcode: 5015332002290
Weight: 1.12kg
Load more reviews
×
{0}