Case of 6 x HG Marble Cement and Lime Film Remover - 1 litre
HG Marble Cement and Lime Film Remover removes cement film, grout residue, water marks, limescale residues and stubborn dirt from marble and other sorts of calcareous and natural stone such as travertine, limestone, granite, terrazzo and ashlar.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
HG Marble Cement and Lime Film Remover removes cement film, grout residue, water marks, limescale residues and stubborn dirt from marble and other sorts of calcareous and natural stone such as travertine, limestone, granite, terrazzo and ashlar.
When using HG Marble and Natural Stone Cement and Lime Film Remover we recommend using Eye Protection
Coverage: 30-40 square metres per litre.
6 x 1 Litre
Directions for use:
Read all precautions before using HG Marble and Natural Stone Cement and Lime Film Remover. Wear Eye Protection
Dilute HG Marble and Natural Stone Cement and Lime Film Remover 1:10 with warm water (approx. 120 degrees F). Apply with a scrubbing brush and brush softly on the wet floor. Leave to penetrate for approx. 5 minutes, keeping the surface damp, then scrub thoroughly and rinse with clean water afterwards.
Do not use too much water when rinsing. It is highly recommended to use a wet vacuum cleaner after rinsing with water. If residues prove difficult to remove use a suitable synthetic scubbing pad.
For cleaning of walls: see above directions for use. Ensure that the wall is wet. Work from below upwards to prevent dripping.
Coverage: 30-40 square metres per litre.
Attention: To aviod etching calcareous natural stones, do not use acids, but only HG Marble Cement and Lime Film Remover.
Barcode: 8711577029678
Weight: 7.5kg
HG Marble Cement and Lime Film Remover removes cement film, grout residue, water marks, limescale residues and stubborn dirt from marble and other sorts of calcareous and natural stone such as travertine, limestone, granite, terrazzo and ashlar.
When using HG Marble and Natural Stone Cement and Lime Film Remover we recommend using Eye Protection
Coverage: 30-40 square metres per litre.
6 x 1 Litre
Directions for use:
Read all precautions before using HG Marble and Natural Stone Cement and Lime Film Remover. Wear Eye Protection
Dilute HG Marble and Natural Stone Cement and Lime Film Remover 1:10 with warm water (approx. 120 degrees F). Apply with a scrubbing brush and brush softly on the wet floor. Leave to penetrate for approx. 5 minutes, keeping the surface damp, then scrub thoroughly and rinse with clean water afterwards.
Do not use too much water when rinsing. It is highly recommended to use a wet vacuum cleaner after rinsing with water. If residues prove difficult to remove use a suitable synthetic scubbing pad.
For cleaning of walls: see above directions for use. Ensure that the wall is wet. Work from below upwards to prevent dripping.
Coverage: 30-40 square metres per litre.
Attention: To aviod etching calcareous natural stones, do not use acids, but only HG Marble Cement and Lime Film Remover.
Barcode: 8711577029678
Weight: 7.5kg