HG Natural Stone Cement Grout Film Remover 1 Litre Product 31

HG Natural Stone Cement Grout Film Remover removes cement film, grout residue, water marks, limescale residues and stubborn dirt from marble and other sorts of calcareous and natural stone such as travertine, limestone, granite, terrazzo and ashlar. 

When using HG Natural Stone Cement Grout Film Remover we recommend using Eye Protection.

Coverage: 30-40 square metres per litre.

1 Litre 

Directions for use:

Read all precautions before using HG Natural Stone Cement Grout Film Remover. Wear Eye Protection (saftey glasses) and rubber gloves. Remove any loose cement, grout and lime scale as much as possible by sweeping. Wet the surface to be cleaned. 

Dilute HG Natural Stone Cement Grout Film Remover 1:10 with warm water (approx. 120 degrees F). Apply with a scrubbing brush and brush softly on the wet floor. Leave to penetrate for approx. 5 minutes, keeping the surface damp, then scrub thoroughly and rinse with clean water afterwards. 

Do not use too much water when rinsing. It is highly recommended to use a wet vacuum cleaner after rinsing with water. If residues prove difficult to remove use a suitable synthetic scubbing pad. 

For cleaning of walls: see above directions for use. Ensure that the wall is wet. Work from below upwards to prevent dripping.

Coverage: 30-40 square metres per litre.

Attention: To aviod etching calcareous natural stones, do not use acids, but only HG Natural Stone Cement Grout Film Remover.

Barcode: 8711577021344
Weight: 1.09kg