Black Mould Anti-Mould Remover Kit includes HG Mould Spray 500ml

Fight mould with our anti-mould kit. Contains: HG Mould Spray 500ml which effectively removes all black and brown stains caused by mould, fungus, moss and algae inside and outside. HG Mould Spray bleaches grey and black mould spots and green algae spots. These unsightly black or brown marks are found on the silicon seal between the bath tub and edges of tiles, on the shower cubicles and on plaster. For cleaning tiled walls, (also suitable for marble) and grouting in the bathroom, toilet, kitchen, cellar, basement, sauna, garage, shed etc. It also cleans facades, balconies, plant boxes and garden ornaments but NOT wood. Size: 500ml

Also contains Fungicidal Wash 1 Litre for treating mould or mildew on ceilings and interior and exterior walls. Our Fungicidal Wash kills, and prevents the re-appearance of unsightly growths of mould, algae, fungi, moss etc. on ceilings and interior or exterior walls. Most effective for use prior to re-painting. pre-diluted which is sufficient to treat an area of approx. 5 m² depending on the strength of the growth. Size: 1 Litre

Black Mould Anti-Mould Remover Kit Usage Instructions

Usage Instructions for HG Mould Spray: The product has a bleaching action. If in doubt first test on an inconspicuous area or a discrete place. Do not remove fungi and algae, but remove moss layers before using the product. This product has a child saftey spray nozzle. Press on top of the nipple at the front of the pump and turn a quarter (STREAM or SPRAY). Spray the surface from 3-5 cm distance and leave it to work for 30 minutes. In the case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with a sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and treated again. Turn the nipple a quarter backwards after use into the saftey position. For cleaning large surfaces with green deposits we advise using HG Moss Algae Remover. Dosage: 500ml of Mould Spray is suitable for 2-3 square metres of wall surfaces, 6-8 square metres of tiled floors.

Attention: Ventilate well during use. Wear rubber / plastic gloves. Prevent splashing on clothing, (high) gloss paint and laminated blinds. Rinse with water immediately in case of contact with skin, clothing and sensitive surfaces. Avoid contact with metals and do not treat coloured surfaces. We do not recommend using this product on artexed ceilings. In elastic grouting (for instance silicone paste) sometimes some permanent brown discolouration may occur after use. In badly glazed tiles and old tiles with hairline cracks brown discolouration may appear. This brown colour can be removed with Hypo (Sodium Thiosulfate) which can be obtained from Homecare Essentials - please contact us if required. .

Usage Instructions for Fungicidal Wash: Shake container well before use. Treat the surface by applying the solution liberally with a brush. Apply at a rate of 1 Litre of solution per 3-7 m². Allow to dry for 24 hours, then thoroughly scrape or brush the surface with a stiff brush to remove all the growth and any flaking paint. Treat the surface again with a second application. It is recommended that a dust mask and safety goggles are worn during application. Do not apply to any outside surfaces in wet weather. The surface may be overpainted in 24 hours.

Coverage: 1 Litre is pre-diluted which is sufficient to treat an area of approx. 5 m² depending on the strength of the growth. After Use: Remove as much product from the application equipment before cleaning. Wash equipment thoroughly in warm soapy water and rinse thoroughly. Do not empty product into drains or watercourses. Please read statutory conditions relating to use on bottle before using.

Black Mould Anti-Mould Remover Kit Technical Information

Barcode: 7426771213518
Weight: 2.12kg

To Download the Safety Data Sheet (PDF) for Granocryl Fungicidal Wash 1 Litre Ready To Use Click HERE
To Download the Safety Data Sheet (PDF) for HG Mould Spray Click HERE