Rustins G Shield Electro Smog Shielding Paint Black 1Litre
Rustins G Shield Electro Smog Shielding Paint provides reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields.
Rustins G Shield Electro Smog Shielding Paint 1L
Rustins G-Shield is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphene to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields. G-Shield is solvent-free with low emissions and has lasting corrosion resistance as the paint contains no metal particles, the graphene in the paint prevents the formation of corrosion on metal surfaces. Can be applied under all commonly used emulsion paints and clean organic plasters. G-Shield has incremental shielding attenuation (up to -57 dB for one layer of coating) for the frequency range up to 20GHz and higher, including the 5G frequency spectrum.The effectiveness of our coatings was tested at NPL the national measurement standards laboratory for the United Kingdom.
Rustins G Shield Electro Smog Shielding Paint instructions
Preparation: The surface must be clean and free from grease and wax. If already painted, remove flaking paint by scraping or use Rustins Strypit Paint and Varnish Stripper, remove all rust with a scraper or Rustins Rust Remover.
Application: Stir well before use until there is no sediment in the bottom of the can. Apply liberally with a synthetic fibre bristle brush. Floor coverings can be laid directly on the shielding coverings. When applying large area shielding coatings, grounding with self-adhesive copper strips up to 1 inch wide is recommended.
Coats: Two coats will provide adequate shielding and coverage, but three coats are recommended for improved durability. For walls and ceilings up to three layers of coating are possible.
Drying Time: Touch dry in approximately 30 minutes depending upon the temperature and humidity.
Re-coating Time: Can be recoated after a minimum of three hours. Protect from rain at least for 24 hours.
Application Temp: Do not apply at temperatures below 10 ̊C or in conditions of high humidity.
Coverage: 1 litre will cover approximately 5-6 sq m per coat.
Compatibility: Can be applied under all commonly used emulsion paints and underneath clean organic plasters.
Storage: Store in a cool place. Keep away from children. Close the open paint jar tightly after use and store it in a cool place for no more than 12 months. Protect from frost.
Rustins G Shield Electro Smog Shielding Paint Technical Information
- Barcode: 5015332004195
- Weight: 1.01kg
To download the safety data sheet for Rusting G Shield Electro Smog Shielding Paint Click HERE
Rustins G Shield Electro Smog Shielding Paint 1L
Rustins G-Shield is based on a high-quality water-borne, cross-linking acrylic resin containing Natural Exfoliated Graphene to provide reliable shielding from high-frequency electromagnetic fields and low-frequency electrical fields. G-Shield is solvent-free with low emissions and has lasting corrosion resistance as the paint contains no metal particles, the graphene in the paint prevents the formation of corrosion on metal surfaces. Can be applied under all commonly used emulsion paints and clean organic plasters. G-Shield has incremental shielding attenuation (up to -57 dB for one layer of coating) for the frequency range up to 20GHz and higher, including the 5G frequency spectrum.The effectiveness of our coatings was tested at NPL the national measurement standards laboratory for the United Kingdom.
Rustins G Shield Electro Smog Shielding Paint instructions
Preparation: The surface must be clean and free from grease and wax. If already painted, remove flaking paint by scraping or use Rustins Strypit Paint and Varnish Stripper, remove all rust with a scraper or Rustins Rust Remover.
Application: Stir well before use until there is no sediment in the bottom of the can. Apply liberally with a synthetic fibre bristle brush. Floor coverings can be laid directly on the shielding coverings. When applying large area shielding coatings, grounding with self-adhesive copper strips up to 1 inch wide is recommended.
Coats: Two coats will provide adequate shielding and coverage, but three coats are recommended for improved durability. For walls and ceilings up to three layers of coating are possible.
Drying Time: Touch dry in approximately 30 minutes depending upon the temperature and humidity.
Re-coating Time: Can be recoated after a minimum of three hours. Protect from rain at least for 24 hours.
Application Temp: Do not apply at temperatures below 10 ̊C or in conditions of high humidity.
Coverage: 1 litre will cover approximately 5-6 sq m per coat.
Compatibility: Can be applied under all commonly used emulsion paints and underneath clean organic plasters.
Storage: Store in a cool place. Keep away from children. Close the open paint jar tightly after use and store it in a cool place for no more than 12 months. Protect from frost.
Rustins G Shield Electro Smog Shielding Paint Technical Information
- Barcode: 5015332004195
- Weight: 1.01kg
To download the safety data sheet for Rusting G Shield Electro Smog Shielding Paint Click HERE