image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Tetrion Make Good Fix a Leak Clear 400ml

Product Code: W6609
£5.99
RRP £6.99 | SAVE £1.00
Item in Stock

Tetrion Make Good Fix a Leak simply spray to fill and seal leaks and cracks

Product Features:
Flexible liquid rubber
bonds to all types of metal, wood,plastic,brick,concrete,PVC
Watertight finish
Prevents leaking
Can be overpainted

Tetrion Fix a Leak is a rubberised coating which fills and seals fine leaks and cracks, it can also protect items and products from moisture and weathering. Tetrion Fix a Leak provides a tough, water tight, yet flexible seal which can stop leaks on certain substrates. This seal withstands movement, wide temperature changes and bright sunlight meaning it is the ideal solution to fix leaky pipes both indoor and out. The clear-drying and over-paintable finish ensures all fixed leaks are inconspicuous.

Rubberised protective proofing formula, UV resistant, easy to use aerosol format, high build, tough, flexible

Seals fine leaks and cracks, use on roof lights, ducting, vinyl, plastic, metal, masonry, can also be used on concrete, plantpots, gutters and downspouts.

Dries to a low gloss finish

Size: 400ml

Remove all loose dirt and debris from the area to be coated. If required, clean and thoroughly dry the area.

  • Remove any previous surface coatings with a wire brush and abrasive paper.
  • Lightly sand with a finer abrasive paper to give a good key and re-clean and dry.
  • Shake areosol can vigorously for 2 minutes minimum.
  • Firstly test spray on a small inconspicuous area to check spray rate, pattern and compatibility.
  • Apply in short even coats. Do not flood, apply lighter coats to avoid runs. Apply 2 or 3 light coats allowing 15 minutes to dry between coats.
  • If spray button clogs, invert can and spray to release.
  • Clean overspray and spillages before coating dries with white spirit-type solvent.
  • Barcode: 5010373068366

    Weight: 0.41kg

    Load more reviews

    Tetrion Fix a Leak is a rubberised coating which fills and seals fine leaks and cracks, it can also protect items and products from moisture and weathering. Tetrion Fix a Leak provides a tough, water tight, yet flexible seal which can stop leaks on certain substrates. This seal withstands movement, wide temperature changes and bright sunlight meaning it is the ideal solution to fix leaky pipes both indoor and out. The clear-drying and over-paintable finish ensures all fixed leaks are inconspicuous.

    Rubberised protective proofing formula, UV resistant, easy to use aerosol format, high build, tough, flexible

    Seals fine leaks and cracks, use on roof lights, ducting, vinyl, plastic, metal, masonry, can also be used on concrete, plantpots, gutters and downspouts.

    Dries to a low gloss finish

    Size: 400ml

    Remove all loose dirt and debris from the area to be coated. If required, clean and thoroughly dry the area.

  • Remove any previous surface coatings with a wire brush and abrasive paper.
  • Lightly sand with a finer abrasive paper to give a good key and re-clean and dry.
  • Shake areosol can vigorously for 2 minutes minimum.
  • Firstly test spray on a small inconspicuous area to check spray rate, pattern and compatibility.
  • Apply in short even coats. Do not flood, apply lighter coats to avoid runs. Apply 2 or 3 light coats allowing 15 minutes to dry between coats.
  • If spray button clogs, invert can and spray to release.
  • Clean overspray and spillages before coating dries with white spirit-type solvent.
  • Barcode: 5010373068366

    Weight: 0.41kg

    Load more reviews

    Associated Products


    image
    Free UK Delivery
    On Orders Over £75
    100% Secure Shipping
    Pay with PayPal or Debit/Credit Card
    image
    We're here for you
    Have a question? Call 01733 241960