image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Rustins Rust Converter 250ml

Product Code: RUSC250
£7.99
RRP £9.16 | SAVE £1.17
Item in Stock

Rustins Rust Converter is a water based treatment which neutralises rust. It stabilises the surface and forms a protective coating once dry.

Product Features:
Ready to use
Inhibits and neutralises rust
Seals out moisture
Prevents future rusting
Water based

Rustins Rust Converter 250ml

Rustins Rust Converter is a water based treatment which neutralises rust. It stabilises the surface and forms a protective coating once dry. It seals and primes so no primer is required allowing to topcoat directly. It will form a barrier against water vapour, oxygen and carbon dioxide. Finish is resistant to salt spray and bacterial growth.

Type: A chemical treatment for the conversion of rust into a coating suitable for subsequent painting etc.
Intended Use:
For use on corroded ferrous metal in order to facilitate refinishing.
Special Features:
Ready to use. Water-based. Inhibits and neutralises rust. Stabilises the surface and forms a protective coating once dry. Rustins Rust Converter will form a barrier against water vapour, oxygen and carbon dioxide to prevent further rusting. Rustins Rust Converter will resist salt spray and bacterial growth.
Coverage: 6-8m² per litre depending on the absorbency of the surface.

To Download the Product Information Sheet (PDF) Click HERE

Size: 250ml

Rustins Rust Converter Usage Instructions

STIR WELL BEFORE USE

Preparation: The surface must be clean, dry and free from oil or grease. Remove old paint, loose rust with steel wool or wire brush. If paint is difficult to remove use Rustins Strypit Paint and Varnish Stripper.
Application: Shake bottle well before use. Pour the required amount needed into a plastic container. Brush a thin coat directly onto rusty areas only, working well into any pitted areas, corners and edges. Ensure that exposed corners and edges are well treated to avoid any chance of rust creep beneath.

Coats: One coat should be sufficient, but see re-coating times below.
Drying Time:
30 minutes
Re-coating time: Rustins Rust Converter will turn any treated areas blueblack as it reacts with the rust. If the area treated doesnt change colour then re-apply after 30 minutes. There is no need to rinse off the first treatment. Apply topcoat after a minimum 3 hours. For best results, paint the same day.Always test on a small area for compatability.
Application Temp. Ideally between 15 – 25°C.
Cleaning: Do not return excess Rust Converter to this container.  Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustins Brush Restorer or Rustins Cellulose Thinners.
Disposal (pollution prevention): Some local authorities have special facilities for disposal of waste paints/varnishes /coatings. Do not empty product into drains or watercourses.

Rustins Rust Converter Technical Information

Barcode: 5015332002689
Weight:
0.27kg

Shelf-life/Storage: Many years in original unopened container stored in a cool, dry, dark place.
Hazards:
WARNING. CAUSES SERIOUS EYE IRRITATION. Wash exposed skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES; Rinse cautiously with water for several minute. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists seek medical advice/attention.

To Download the Safety Data Sheet (PDF) for Rustins Rust Converter Click HERE

Load more reviews

Rustins Rust Converter 250ml

Rustins Rust Converter is a water based treatment which neutralises rust. It stabilises the surface and forms a protective coating once dry. It seals and primes so no primer is required allowing to topcoat directly. It will form a barrier against water vapour, oxygen and carbon dioxide. Finish is resistant to salt spray and bacterial growth.

Type: A chemical treatment for the conversion of rust into a coating suitable for subsequent painting etc.
Intended Use:
For use on corroded ferrous metal in order to facilitate refinishing.
Special Features:
Ready to use. Water-based. Inhibits and neutralises rust. Stabilises the surface and forms a protective coating once dry. Rustins Rust Converter will form a barrier against water vapour, oxygen and carbon dioxide to prevent further rusting. Rustins Rust Converter will resist salt spray and bacterial growth.
Coverage: 6-8m² per litre depending on the absorbency of the surface.

To Download the Product Information Sheet (PDF) Click HERE

Size: 250ml

Rustins Rust Converter Usage Instructions

STIR WELL BEFORE USE

Preparation: The surface must be clean, dry and free from oil or grease. Remove old paint, loose rust with steel wool or wire brush. If paint is difficult to remove use Rustins Strypit Paint and Varnish Stripper.
Application: Shake bottle well before use. Pour the required amount needed into a plastic container. Brush a thin coat directly onto rusty areas only, working well into any pitted areas, corners and edges. Ensure that exposed corners and edges are well treated to avoid any chance of rust creep beneath.

Coats: One coat should be sufficient, but see re-coating times below.
Drying Time:
30 minutes
Re-coating time: Rustins Rust Converter will turn any treated areas blueblack as it reacts with the rust. If the area treated doesnt change colour then re-apply after 30 minutes. There is no need to rinse off the first treatment. Apply topcoat after a minimum 3 hours. For best results, paint the same day.Always test on a small area for compatability.
Application Temp. Ideally between 15 – 25°C.
Cleaning: Do not return excess Rust Converter to this container.  Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustins Brush Restorer or Rustins Cellulose Thinners.
Disposal (pollution prevention): Some local authorities have special facilities for disposal of waste paints/varnishes /coatings. Do not empty product into drains or watercourses.

Rustins Rust Converter Technical Information

Barcode: 5015332002689
Weight:
0.27kg

Shelf-life/Storage: Many years in original unopened container stored in a cool, dry, dark place.
Hazards:
WARNING. CAUSES SERIOUS EYE IRRITATION. Wash exposed skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES; Rinse cautiously with water for several minute. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists seek medical advice/attention.

To Download the Safety Data Sheet (PDF) for Rustins Rust Converter Click HERE

Load more reviews

Associated Products


image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960