Associated Products
Bonda Filler 500g
Bonda Filler is a two-part polyester filler with good sanding properties. Bonds strongly to metal, GRP and wood.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Bonda Filler 500g
Bonda Filler is an easy-to-use filler with good sanding properties that gives a smooth, dense surface. Bonds strongly to metal, GRP and wood. Takes all types of paint. Used in the automotive industry for filling purposes, interior and exterior.
Bonds strongly to metal, fibre glass and wood.
Contains: Hardener and Spreader
To Download the Product Information Sheet (PDF) for Bonda Filler Click HERE
Size: 500g
Also Available: Bonda Filler 1.5kg
Bonda Filler Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Clean Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Bonda Filler Technical Information
Barcode: 5014197091005
Weight: 0.51kg
Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download product safety data sheet (PDF) click HERE
Bonda Filler 500g
Bonda Filler is an easy-to-use filler with good sanding properties that gives a smooth, dense surface. Bonds strongly to metal, GRP and wood. Takes all types of paint. Used in the automotive industry for filling purposes, interior and exterior.
Bonds strongly to metal, fibre glass and wood.
Contains: Hardener and Spreader
To Download the Product Information Sheet (PDF) for Bonda Filler Click HERE
Size: 500g
Also Available: Bonda Filler 1.5kg
Bonda Filler Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Clean Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Bonda Filler Technical Information
Barcode: 5014197091005
Weight: 0.51kg
Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download product safety data sheet (PDF) click HERE