Associated Products
Rustins Quick Dry Outdoor Wood Stain Light Oak 1 Litre
Rustins Exterior Wood Stain Light Oak is quick drying, very durable. Gives long lasting protection to all external wood.
Rustins Exterior Wood Stain Light Oak is quick drying, very durable and available in gloss and satin. Gives long lasting protection to all external wood, and is touch dry in 30 minutes, re-coatable in 4 hours.
Intended Use: Exterior joinery both hard and softwood, doors, windows, garden furniture, conservatories. May also be used as a sealer for concrete.
Type: Coloured water-based acrylic varnish. Gives long lasting protection to all external wood, allowing the natural grain to show through.Special Features: Low odour, resists cracking, peeling, blistering.
Coverage 12-15m² per Litre per coat, depending on absorbency of surface.
Finish: Satin
Colour: Light Oak - also available in Dark Oak, Ebony, Mahogany, Medium Oak, Teak and Walnut
Click HERE to see full Range
Size: 1 Litre
Also Available in 250ml, 500ml and 2.5 Litre Size
Application Using a synthetic brush, apply liberally with a full brush finishing with the grain. The first coat may be diluted with water on hot days (up to 15%). Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.Coats Apply 3 coats and lightly sand after 1st coat if there is raising of the grain.
Drying Time Touch dry 30 minutes. (On hot days may be touch dry within 10 minutes).
Re-coating Time 4 hours minimum, depending on temperature & humidity.
Application Temp. Ideally 15-25°C. Do not apply below 10°C, or in high humidity or if rain expected.
Maintenance Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.
Compatibility May be applied over old existing coating if these are in good condition and rubbed down to provide a key. Coatings not in good condition should be removed with Rustins Strypit Paint and Varnish Stripper. If applying over wood preservatives test on a small area to ensure the varnish dries and adheres well.
Settlement STIR WELL BEFORE USE. May dry glossy if not adequately stirred.
Clean-Up With water whilst still wet. If dried-on, clean equipment and brushes with Rustins Brush Restorer.
Barcode: 5015332731039
Weight: 1.2 Kg
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. PROTECT FROM FROST.
Rustins Exterior Wood Stain Light Oak is quick drying, very durable and available in gloss and satin. Gives long lasting protection to all external wood, and is touch dry in 30 minutes, re-coatable in 4 hours.
Intended Use: Exterior joinery both hard and softwood, doors, windows, garden furniture, conservatories. May also be used as a sealer for concrete.
Type: Coloured water-based acrylic varnish. Gives long lasting protection to all external wood, allowing the natural grain to show through.Special Features: Low odour, resists cracking, peeling, blistering.
Coverage 12-15m² per Litre per coat, depending on absorbency of surface.
Finish: Satin
Colour: Light Oak - also available in Dark Oak, Ebony, Mahogany, Medium Oak, Teak and Walnut
Click HERE to see full Range
Size: 1 Litre
Also Available in 250ml, 500ml and 2.5 Litre Size
Application Using a synthetic brush, apply liberally with a full brush finishing with the grain. The first coat may be diluted with water on hot days (up to 15%). Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.Coats Apply 3 coats and lightly sand after 1st coat if there is raising of the grain.
Drying Time Touch dry 30 minutes. (On hot days may be touch dry within 10 minutes).
Re-coating Time 4 hours minimum, depending on temperature & humidity.
Application Temp. Ideally 15-25°C. Do not apply below 10°C, or in high humidity or if rain expected.
Maintenance Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.
Compatibility May be applied over old existing coating if these are in good condition and rubbed down to provide a key. Coatings not in good condition should be removed with Rustins Strypit Paint and Varnish Stripper. If applying over wood preservatives test on a small area to ensure the varnish dries and adheres well.
Settlement STIR WELL BEFORE USE. May dry glossy if not adequately stirred.
Clean-Up With water whilst still wet. If dried-on, clean equipment and brushes with Rustins Brush Restorer.
Barcode: 5015332731039
Weight: 1.2 Kg
Shelf-life/Storage: Many years if stored in original, tightly closed container in normal conditions. PROTECT FROM FROST.