Associated Products
Bonda Woodfill White 1.5kg
Bonda Woodfill is an superior two component rapid hardening wood filler.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Sands well to give a excellent base for finishing.
A two-part polyester filler.
Easy to mix and apply and is used fill knots in timber, pin holes, defects etc. Easy to sand and tack free.
Size: 1.5kg
Colour: White
Preparation:
Should be applied onto a clean and dry substrate.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained.
Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time:
30 mins – 1 hr depending on temperature and humidity.
Application Temp:
Ideally 15-25°C, but do not use below 10°C.
Clean-Up:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Hazards:
Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download the product safety data sheet (PDF), Click HERE
Barcode: 5014197186152
Weight: 1.5kg
Sands well to give a excellent base for finishing.
A two-part polyester filler.
Easy to mix and apply and is used fill knots in timber, pin holes, defects etc. Easy to sand and tack free.
Size: 1.5kg
Colour: White
Preparation:
Should be applied onto a clean and dry substrate.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained.
Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time:
30 mins – 1 hr depending on temperature and humidity.
Application Temp:
Ideally 15-25°C, but do not use below 10°C.
Clean-Up:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Hazards:
Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download the product safety data sheet (PDF), Click HERE
Barcode: 5014197186152
Weight: 1.5kg