![image](/images/products/small/POST500-210504025912-1.jpg)
Associated Products
Rustins Polyurethane Varnish Satin Teak 500ml
Rustins Polyurethane Varnish Satin Teak stains and varnishes in one operation.
Rustins Polyurethane Varnish Satin Teak is an attractive natural wood shade available in a satin finish that stains and varnishes in one operation.
Intended Use: Bare wood, hardboard, MDF and unsealed cork. Interior use only. For floors, use Rustins Polyurethane Floor Sealer.
Type: A high build, air-drying coloured polyurethane varnish. The finish produced is tough, durable and resistant to oil, water and many chemicals.
Special Features: Stains and varnishes in one. High abrasion and mechanical impact resistance.
Coverage 14-16m² per litre, 1 coat, depending on the absorbency of the surface.
Colour: Teak - also available in Antique Pine, Dark Oak, Walnut, Mahogany, Oak and Pine
Finish: Satin - also available in Gloss
Size: 500ml
Also Available in 250ml and 1 Litre Sizes
Application Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with White Spirit (1 part to 8 parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats.
Coats 2 coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats.Drying Time Touch dry in approximately 2-4 hours, depending on the temperature and humidity.Re-coating Time Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Maintenance The varnish will take about 24 hours to dry fully. Afterwards, the surface may be cleaned by wiping with a mild detergent solution when necessary. To restore gloss, wax polish may be applied. Worn areas may be re-coated once cleaned, de-waxed and lightly sanded to provide a key.
Compatibility The varnish may be used over the following Rustins products; Rustins Wood filler, Grain filler and Rustins Polyurethane Varnish. The colour will darken with additional coats. A lighter shade can be obtained by diluting with White Spirit. Rustins Polyurethane Clear Varnish may be applied over Varnish Stain without altering the colour.
Settlement STIR WELL BEFORE USE. Satin and Matt finishes may dry glossy if not thoroughly stirred.
Clean-Up Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer.
Barcode: 5015332413034
Weight: 0.65kg
Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition-no smoking. Avoid contact with eyes and skin, Use only in well ventilated areas.
Shelf-life/Storage: Many years if stored in original, tightly closed container in cool, dry conditions.
Rustins Polyurethane Varnish Satin Teak is an attractive natural wood shade available in a satin finish that stains and varnishes in one operation.
Intended Use: Bare wood, hardboard, MDF and unsealed cork. Interior use only. For floors, use Rustins Polyurethane Floor Sealer.
Type: A high build, air-drying coloured polyurethane varnish. The finish produced is tough, durable and resistant to oil, water and many chemicals.
Special Features: Stains and varnishes in one. High abrasion and mechanical impact resistance.
Coverage 14-16m² per litre, 1 coat, depending on the absorbency of the surface.
Colour: Teak - also available in Antique Pine, Dark Oak, Walnut, Mahogany, Oak and Pine
Finish: Satin - also available in Gloss
Size: 500ml
Also Available in 250ml and 1 Litre Sizes
Application Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with White Spirit (1 part to 8 parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats.
Coats 2 coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats.Drying Time Touch dry in approximately 2-4 hours, depending on the temperature and humidity.Re-coating Time Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
Maintenance The varnish will take about 24 hours to dry fully. Afterwards, the surface may be cleaned by wiping with a mild detergent solution when necessary. To restore gloss, wax polish may be applied. Worn areas may be re-coated once cleaned, de-waxed and lightly sanded to provide a key.
Compatibility The varnish may be used over the following Rustins products; Rustins Wood filler, Grain filler and Rustins Polyurethane Varnish. The colour will darken with additional coats. A lighter shade can be obtained by diluting with White Spirit. Rustins Polyurethane Clear Varnish may be applied over Varnish Stain without altering the colour.
Settlement STIR WELL BEFORE USE. Satin and Matt finishes may dry glossy if not thoroughly stirred.
Clean-Up Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer.
Barcode: 5015332413034
Weight: 0.65kg
Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition-no smoking. Avoid contact with eyes and skin, Use only in well ventilated areas.
Shelf-life/Storage: Many years if stored in original, tightly closed container in cool, dry conditions.