image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Rustins Decorators Varnish for Interior/Exterior Use Dead Flat 500ml

Product Code: DVMT500
£11.99
RRP £12.50 | SAVE £0.51
Item in Stock

Dead flat matt varnish for use on emulsion paint, wallpaper, plaster and wood. This Rustins decorator varnish protects the area from smudges, scuffs and stains

Product Features:
Dead flat
Quick drying
High UV resistance
Protects against finger smudges, scuffing and staining
1 litre will cover approximately 15-20m² in 1 coat

Rustins Decorators Varnish for Interior/Exterior Use Dead Flat 500ml

Rustins Decorators Varnish for Use Dead Flat is a low solids water-based acrylic protective coating with high UV resistance for use on emulsion paint, wallpaper, plasterwork and other surfaces to protect against finger marks, stains, scuffing and colour fading. Water, stain and abrasion resistant. Fast drying. Suitable for interior and exterior use.

Coverage: 1 litre will cover approximately 15-20m² in 1 coat depending on the absorbency of the surface.

Size: 500ml

Also Available in a case of 6 - SAVE ££ - See: Case of 6 x Rustins Decorators Varnish for Interior/Exterior Use Dead Flat 500ml

Rustins Decorators Varnish for Interior/Exterior Use Dead Flat Usage Instructions

Preparation: The surface must be clean and free from dust, dirt, oil and contamination.
Application:
Apply thin coats using a synthetic varnish brush. Dilute first coat with 10% water if to be used over porous surfaces. Ideally, apply between 15 – 25°C. Avoid damp/high humidity conditions. Do not apply to hot surfaces or in strong
 sunlight if possible or if rain is likely. Three coats are recommended for high durability. Always test for compatibility before covering the whole area.
Re-coating Time:
Further coats can be applied once the previous coat is dry. This will be approximately 1 hour depending on the temperature and humidity at the time of application.
Cleaning:
Remove as much product as possible and return to this container. Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustins Brush Restorer or Rustins Cellulose Thinners.
Disposal (pollution prevention):
 Some local authorities have special facilities for the disposal of waste paints/varnishes /coatings. Do not empty the product into drains or watercourses.
Storage:
Store in a cool dry place with the lid tightly closed. Protect from frost.

Rustins Decorators Varnish for Interior/Exterior Use Dead Flat Technical Information

Weight: 0.6kg
Barcode: 5015332005475

Health and Safety: Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes-wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water.

    Load more reviews

    Rustins Decorators Varnish for Interior/Exterior Use Dead Flat 500ml

    Rustins Decorators Varnish for Use Dead Flat is a low solids water-based acrylic protective coating with high UV resistance for use on emulsion paint, wallpaper, plasterwork and other surfaces to protect against finger marks, stains, scuffing and colour fading. Water, stain and abrasion resistant. Fast drying. Suitable for interior and exterior use.

    Coverage: 1 litre will cover approximately 15-20m² in 1 coat depending on the absorbency of the surface.

    Size: 500ml

    Also Available in a case of 6 - SAVE ££ - See: Case of 6 x Rustins Decorators Varnish for Interior/Exterior Use Dead Flat 500ml

    Rustins Decorators Varnish for Interior/Exterior Use Dead Flat Usage Instructions

    Preparation: The surface must be clean and free from dust, dirt, oil and contamination.
    Application:
    Apply thin coats using a synthetic varnish brush. Dilute first coat with 10% water if to be used over porous surfaces. Ideally, apply between 15 – 25°C. Avoid damp/high humidity conditions. Do not apply to hot surfaces or in strong
     sunlight if possible or if rain is likely. Three coats are recommended for high durability. Always test for compatibility before covering the whole area.
    Re-coating Time:
    Further coats can be applied once the previous coat is dry. This will be approximately 1 hour depending on the temperature and humidity at the time of application.
    Cleaning:
    Remove as much product as possible and return to this container. Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustins Brush Restorer or Rustins Cellulose Thinners.
    Disposal (pollution prevention):
     Some local authorities have special facilities for the disposal of waste paints/varnishes /coatings. Do not empty the product into drains or watercourses.
    Storage:
    Store in a cool dry place with the lid tightly closed. Protect from frost.

    Rustins Decorators Varnish for Interior/Exterior Use Dead Flat Technical Information

    Weight: 0.6kg
    Barcode: 5015332005475

    Health and Safety: Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes-wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water.

      Load more reviews

      100% Secure Shipping
      Pay with PayPal or Debit/Credit Card
      image
      We're here for you
      Have a question? Call 01733 241960