Associated Products
Tetrion Make Good Seal and Waterproof 400ml
Tetrion Make Good Seal and Waterproof Spray for flat roofs, asphalt, gutters and pipework.
Tetrion Make Good Seal and Waterproof 400ml
Tetrion Make Good Seal and Waterproof Spray for flat roofs, asphalt, gutters and pipework, can be used on metal, walls, PVC and tarmac in all weather conditions. An abrasion resistant and durable coating which gives effective, heavy duty protection and sealing power to flat roofing, metal panels and even vertical surfaces. It is formulated from a black bitumen base. Designed to provide a thick film without runs and sags. It gives excellent protection from stones, moisture and and provides a barrier from water and dampness.
Offers corrosion protection, excellent ahdesion to metal, gutters, driveways,pipework and a protective overcoat for sheds. it is water resistant and can be applied in all weather conditions. Also self healing, non-drying film, sound deadening, prevents water ingress, does not run or sag, excellent adhesion, black bitumen base.
Size: 400ml
Tetrion Make Good Seal and Waterproof Usage Instructions
Application directions:
- Remove all loose dirt and debris from the area to be coated. If required, clean and thoroughly dry the area.
- Remove any previous surface coatings with a wire brush and abrasive paper.
- Lightly sand with a finer abrasive paper to give a good key and re-clean and dry.
- Shake areosol can vigorously for 2 minutes minimum.
- Firstly test spray on a small inconspicuous area to check spray rate, pattern and compatibility.
- Apply in short even coats. Do not flood, apply lighter coats to avoid runs. Apply 2 or 3 light coats allowing 15 minutes to dry between coats.
- If spray button clogs, invert can and spray to release. Clean overspray and spillages with white spirit-type solvent.
- Paintfilm should be touch dry in 2-3 hours and thorough dry in 5-6 hours.
NOTE: Exterior use only, Cannot be overpainted
Barcode: 5010373068359
Weight: 0.51kg
Tetrion Make Good Seal and Waterproof 400ml
Tetrion Make Good Seal and Waterproof Spray for flat roofs, asphalt, gutters and pipework, can be used on metal, walls, PVC and tarmac in all weather conditions. An abrasion resistant and durable coating which gives effective, heavy duty protection and sealing power to flat roofing, metal panels and even vertical surfaces. It is formulated from a black bitumen base. Designed to provide a thick film without runs and sags. It gives excellent protection from stones, moisture and and provides a barrier from water and dampness.
Offers corrosion protection, excellent ahdesion to metal, gutters, driveways,pipework and a protective overcoat for sheds. it is water resistant and can be applied in all weather conditions. Also self healing, non-drying film, sound deadening, prevents water ingress, does not run or sag, excellent adhesion, black bitumen base.
Size: 400ml
Tetrion Make Good Seal and Waterproof Usage Instructions
Application directions:
- Remove all loose dirt and debris from the area to be coated. If required, clean and thoroughly dry the area.
- Remove any previous surface coatings with a wire brush and abrasive paper.
- Lightly sand with a finer abrasive paper to give a good key and re-clean and dry.
- Shake areosol can vigorously for 2 minutes minimum.
- Firstly test spray on a small inconspicuous area to check spray rate, pattern and compatibility.
- Apply in short even coats. Do not flood, apply lighter coats to avoid runs. Apply 2 or 3 light coats allowing 15 minutes to dry between coats.
- If spray button clogs, invert can and spray to release. Clean overspray and spillages with white spirit-type solvent.
- Paintfilm should be touch dry in 2-3 hours and thorough dry in 5-6 hours.
NOTE: Exterior use only, Cannot be overpainted
Barcode: 5010373068359
Weight: 0.51kg
Associated Products